Mobile diesel power · trailer mounted
Mobile Diesel Generator Set on a Two-Wheel Road Trailer
A canopy generator set built onto a road trailer: engine, alternator, base tank and controls on one chassis that tows behind a pickup. It is the same set we would build onto a skid or into a container, mounted for a site that has no address yet.
Everything travels with the unit. Fuel sits in the base tank, the battery and control panel are on the frame behind lockable doors, and there is no bund to cast, no plinth to level and nothing to lift onto a truck bed before the set can run.
- Trailertwo wheels
- Canopylockable steel
- Basetank in chassis
- kVAper project
Specification
What is fixed, and what is quoted per project
The trailer build below is the same on every unit. Power, voltage and the tank size are quoted against the load the set has to carry.
- Mounting
- Two-wheel road trailer with A-frame drawbar
- Chassis
- Fabricated steel, fuel tank forming the base
- Running gear
- Single axle, leaf springs, mudguards
- Coupling
- Ball or ring coupling, with safety chain
- Road lighting
- Tail, brake and indicator lights
- Canopy
- Lockable steel, louvred ventilation, access doors
- Lifting and lashing
- Crane points and tie-down points on the frame
- Power
- Selected per project, kVA prime and standby
- Voltage
- 400 / 230 V, 50 or 60 Hz, per project
- Finish
- Polyurethane paint, white canopy on black base
Power is not published as a single range here because the trailer is sized by the wet weight of the set, not by a kVA number. Send the load and the destination, and the quotation carries the set, the axle and the tank together.
Honest limits
When a trailer is the wrong answer
The three cases below are quoted as a skid, a flatbed move or an acoustic enclosure rather than as a trailer, because that is the cheaper way to solve them.
A permanent installation
If the set will not move again, a skid on a concrete plinth costs less, sits lower and has no tyres to age in the sun. The trailer is worth its price when the unit moves at least a few times a year.
A long motorway move
The running gear is built for site tracks and short road transfers, not for weekly hundred-kilometre hauls. Beyond that, the unit travels on a flatbed and the trailer waits.
A residential noise limit
The standard canopy is weatherproof, not acoustic. Night-time limits next to housing need the acoustic canopy or a fixed enclosure with a specified sound pressure at a stated distance.
Selection
Five numbers size the unit
A trailer set is quoted from the load and the site, not from a picture of the canopy. These five answers decide the set, the tank and the running gear:
01
Power
kVA at prime and at standby, and the power factor of the load. A kW figure alone does not size a generator.
02
Voltage
400 / 230 V at 50 Hz, or 60 Hz for export, single or three phase, and whether the load is balanced across the phases.
03
Duty
Hours a day and days a year, continuous or standby. It decides the engine rating, the tank size and the service interval.
04
Ground
Hard standing, site track or soft field. It decides the tyres, and whether the unit needs to be levelled and chocked before it runs.
05
Climate
Ambient temperature, altitude and dust at the site. Derating for altitude and heat is calculated, not guessed.
Selection questions
Before the quotation
What size set fits on a trailer?
The trailer is sized by the weight and footprint of the set, not by a fixed kVA ceiling. A 20 kVA set and a 500 kVA set both travel on two wheels, but not on the same axle, tyres or drawbar. The number that decides it is the wet weight with a full tank, which is why we quote the set and the trailer together rather than the trailer on its own.
Can it be towed on a public road?
The unit is built for the road, but what is legal depends on where it is registered: lighting, coupling type, mudguards, brakes and speed rating are set by local type approval, and the thresholds differ between countries. Tell us the destination and we build the lighting and coupling to that specification; where brakes are required above a weight threshold, they are quoted as part of the trailer.
How is it earthed on site?
There is an earthing terminal on the frame, and the set is earthed to a site rod or to the installation earth bar. How the neutral is bonded depends on the earthing system the site uses, so that is decided with the electrical contractor before commissioning rather than assumed at the factory.